12KV Station Post Insulator for grid power network
12KV station post insulator for grid power network is produced by Orient power China.12KV station post insulator for grid power network for middle and high voltage is used on Power station.
Orient Power Company is one of the biggest companies in China to produce porcelain station post insulator for grid power network. Over the years, by developing new production lines and gaining experience in new electrical and electronic sectors, Orient power has diversified its production and several production lines
Different station post high voltage insulator has different length and creepage distance, this enables them to use on different lever. Except 12KV station post insulator for grid power network, our other station post insulator for grid power network will be applies to 500KV voltage.
Introduction about 12KV station post insulator for grid power network:
1.Section length is up to 255mm.
2.Creepage distance is 480mm,
3.Power frequency withstand voltage wet is 70KV
5.Lightning impulse withstand voltage is 160 KV
6.Minimum failing loading bending is 10KN,
7.Minimum failing load torsion is 1kN.m
8.The weight is approx. 3.4kg
9.12KV Station Post Insulator for headline network is being obedient to IEC, EDS, EN STANDARD.
Final ,Orient company have OEM and ODM service .You can send email to us your requirements and conditions about electric power fitting, porcelain insulators and other high voltage equipment, later we produce them to you as your demands.