+86 371 86097078

+86 371 86097078

+86 13673997131

sales@orientinsulators.com
Wechat:
+8613673997131

52kV DIN bushing insulator
DIN bushing insulator 52kv, the DIN type number is 52/250, 52/630, 52/1000, 52/2000, 52/3150
DIN bushing insulator 10NF1000
DIN bushing insulator, the type number is 10NF1000, 20NF1000, 30NF1000,10NF2000,20NF2000,30NF2000,10NF3150,20NF3150,30NF3150
Assembly bushing 10NF250 20NF250 30NF250
Assembly bushing 10NF250, 20NF250, 30NF250,10NF630,20NF630,30NF630.All the bushing insulator are according to DIN standard.
DIN 42539 bushing DT 3-6500
DIN bushing,the DIN type number is DT 3/6500. the bushing insulator voltage is 3kv, current is 6500A

High voltage porcelain station post insulator C10-1050 is very common used in the substations. The height of it is 2300, the tolerance of it is plus or minus 3.5mm. Since it is big, normally we will make it into two stacks, and then assemble them together to reach 2300mm height.

C10-1050 means lightning impulse withstand voltage is 1050kv, this is the main quality of the high voltage porcelain station post insulator C10-1050, except this, the IEC 60273 international standard also requires switching impulse withstand voltage under wet 750KV, these two values are the electrical performance of the station post insulator.

Except the electrical parameter, the cantilever strength is the most important one for high voltage porcelain station post insulator C10-1050, when it is used on substations, it will under some mechanical load, the high voltage insulator should withstand the certain strength. The rated cantilever strength of high voltage porcelain station post insulator C10-1050 is 10KN, the service load of it on substation won’t be over 5KN, so it can service very well on substations.

High voltage porcelain station post insulator C10-1050

Except high voltage porcelain station post insulator C10-1050, C4-1050, C6-1050,C8-1050,C12.5-1050, C16-1050, C20-1050 are in the same types. Main parameter is as follows:
Cantilever strength: 4KN, 6KN, 8KN, 10KN, 12.5KN, 16KN, 20KN
Lightning impulse withstand voltage: 1050KV
Switch impulse withstand voltage wet: 750
Power frequency withstand voltage wet: 460KV
Height of insulator: 2300mm
Creepage distance: 4000mm, 5650mm
Fixing diameter of end fitting hole: 127, 225, 254 ,275 300 or 325mm

High voltage porcelain station post insulator C10-1050 is Orient Power company main product, and grey color, brown color of the insulator is available, except the standard code number, we can also supply and design according to customer requirement. Orient also provides shackle insulator ED-2B, and maybe you are seeking for this high quality insulator.